New sod care starts before it is even installed. The soil on which🐼 you are going to install the sod must be watered well p🐟rior to installation. Dry soil could remove all the moisture from the sod, making it harder for it to take root. It is also a good idea to treat the soil with a pre-plant fertilizer before the sod is installed.
Sod has a short shelf-life and cannot be stored in your side yard or garage for a long time. The Florida heat would build up and damage the roots and surface of the sod. Sod should be installed as soon as it is delivered, especially in hu🧸mid subtropical regions like Florida.
Immediately water your new sod after it is installed. Liberally💃 irrigate it until the water penetrates at least a few inches into♔ the soil—it will feel soggy to walk on. Check the sod every few hours. If the ground does not still feel soggy, water it again. It is nearly impossible to overwater new sod.
New sod has small roots, so it can only absorb so much water at a time. Thus, you should irrigate the sod multiple times a day for short pe🗹riods of time. Schedule watering in the morning and afternoon hours. If you water it in the late evening 💯or at night, there is more chance of a fungus problem arising.
Depending on the temperature✅, you should water it 2 to 6 times a day for 4 to 6 minutes at a time. The hotter it is, the more you should waꩵter it. The goal is to keep the sod and soil underneath moist, but no longer soggy, throughout the day.
Try to stay off the sod for the first two weeks. The roo🐷ts need time to take hold and dig in. It will not be ready to mow unt🌱il around the 14-day mark. Ease up on the watering schedule the day before you plan to mow, as this will allow the soil to firm up. Set your mower’s cutting level to high. You do not want to cut more than the top one-third of the blades of grass.
Now that you’ve mowed it for the first time, gradually decrease the number of times you water per day but increase the length of time for each cycle. Now that the roots are well established, they can handle larger quantities of water. Keep repeating this process of reducing the frequency of watering gradually over the next few weeks until you are irrigating the grass once pಌer day and eventually only one to three times per week, depending on the season.
If you want the turf to look healthy, to be thick to crowd out the weeds, and to be drought-resistant, then you must understand the right way to mow. You should not be scalping the lawn comp๊letely while mowing it as this makes the surface sparse, weak, and more vulnerable. Remember not to mow down more than the top one-third of the grass during a mowing cycle. Sparse lawns leave the soil exposed for weed seedlings to take root and for sunlight to reach these seedlings, thus making it prone to weed infestatio
Before you start mowing, make sure that your mower blade is sharpened properly. Sharpening the blade gives the grass a clean-cut without tearing the grass and does not leave uneven and jagged edges. If you use a dull and blunt blade, your l🏅awn may develop a brownish white hue, and the tears from blunt blades would create openings for diseases and pests.
In warm and sunny places like Florida, you must allow your grass to grow a little taller, as these tall blades would create shade for the soil. This height helps reduce weed infestations and keeps the soil moist for longer. The process of photosynthesis is also better on surꦍfaces of long grass blades, thus giving your lawn a healthy glow.
The right use of chemicals and fertilizers is essential for healthy grass growth and to mitigate the risks of diseases by keeping insects at bay. If the sod is newly installed, you should wait for at least a month after installation before you use any fertilizers. Lime and sulfur, along with the right liquid ferti𝓀lizers, can be added to the soil depending on the soil test and the type of sod you are choosing. You can determine the pH levels of the soil through a store-bought pH tes🎃t.
Strains of St. Augustine grow at a pH level of 6 to 6.5. If the test result shows higher pH levels, then you can add sulfur to the soil 🍒to reduce these levels. Pelletized Sulphur of up to 5 lbs. can be used for every thousand square feet of turf. Keep in mind that sulfur can only be added when the air temperature is below 75°F.
You should also add 1 to 2 pounds of nitrogen per thousand sꦦquare f𒁃eet of turf to the soil 2-3 times per year. Using a high potassium fertilizer along with the actual nitrogen, keeps the soil healthy and vibrant. To add to this green glow, you can also use iron sulfate or any soluble iron product between the fertilization.
You should also keep the following in mind for proper sod 🍨and lawn maintenance care: